If you want to find out more about

CV Instruments Hardness Test Blocks

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

CV instruments Hardness Test Blocks are devised by Bowers Group for reference and caiibration. Each CV instruments Hardness Reference Blocks are supplied with official calibration certificates UKAS, DKD or ASTM. When using hardness reference blocks it is irrelevant whether the value of the nominal hardness to be delivered corresponds exactly to the actual calibration value observed, since scale adaptation should be carried out with at least two hardness values. The hardness reference blocks used for indirect verification should conform largely to the workpiece to be tested, in terms of material characteristics and hardness range. For this reason a hardness reference block made of aluminium was developed for the lower hardness range which can not be covered by steel, using new materials technology methods. CV Instruments hardness reference blocks are used for routine verification and calibration of hardness testing machines, as well as for periodical check and sometimes for overtaking of hardness scales on a hardness testing machine. Regular precision hardness reference blocks are factory calibrated to applicable standards to ensure the functionality and relative reliability and accuracy of measurement of a hardness testing machine.   CV instruments Hardness Reference Blocks Features: Complete range for Rockwell, Vickers and Brinell Each CV instruments Hardness Reference Blocks are supplied with official calibration certificates UKAS, DKD or ASTM. Suitable for routine quality inspection on production line.

CV instruments Hardness Test Blocks are devised by Bowers Group for reference and caiibration. Each CV instruments Hardness Reference Blocks are supplied with official calibration certificates UKAS, DKD or ASTM. When using hardness reference blocks it is irrelevant whether the value of the nominal hardness to be delivered corresponds exactly to the actual calibration value observed, since scale adaptation should be carried out with at least two hardness values.

The hardness reference blocks used for indirect verification should conform largely to the workpiece to be tested, in terms of material characteristics and hardness range. For this reason a hardness reference block made of aluminium was developed for the lower hardness range which can not be covered by steel, using new materials technology methods.

CV Instruments hardness reference blocks are used for routine verification and calibration of hardness testing machines, as well as for periodical check and sometimes for overtaking of hardness scales on a hardness testing machine. Regular precision hardness reference blocks are factory calibrated to applicable standards to ensure the functionality and relative reliability and accuracy of measurement of a hardness testing machine.

 

CV instruments Hardness Reference Blocks Features:

  • Complete range for Rockwell, Vickers and Brinell
  • Each CV instruments Hardness Reference Blocks are supplied with official calibration certificates UKAS, DKD or ASTM.
  • Suitable for routine quality inspection on production line.

TECHNICAL SPECIFICATION

 CV instruments Rockwell Hardness Reference Blocks Ordering Guide:

 

Code No.

Description

CV-9201-194

Test Block HRA70-85 with factory certificate

CV-9202-001

Hardness tester block 80-100HRB with factory certificate

CV-9203-121

Test Block hrc 25-35 with factory certificate

CV-9203-141

Test Block hrc 40-50 with factory certificate

CV-9203-181

Test Block hrc 55-65 with factory certificate

 

 CV instruments Vickers Hardness Reference Blocks Ordering Guide:

 

Code No.

Description

CV-9600-037

Micro-Vickers test block 700-800HV1 with factory certificate

CV-9600-040

Micro-Vickers test block 400-500HV0.2 with factory certificate

 

  CV instruments Brinell Hardness Reference Blocks Ordering Guide:

 
Code No. 

Description

CV-9800-012

Brinell test block 150-250HBW 10/3000 with factory certificate

CV-9800-021

Brinell Test block 75-125HBW 10/1000 with factory certificate

CV-9800-002

Brinell Test block 150-250HBW 2.5/187.5 with factory certificate

Request a Quote

Request A Quote

Please complete the below form to receive further information.

CV Instruments Hardness Test Blocks CV Instruments Hardness Test Blocks Product description:

CV instruments Hardness Test Blocks are devised by Bowers Group for reference and caiibration. Each CV instruments Hardness Reference Blocks are supplied with official calibration certificates UKAS, DKD or ASTM. When using hardness reference blocks it is irrelevant whether the value of the nominal hardness to be delivered corresponds exactly to the actual calibration value observed, since scale adaptation should be carried out with at least two hardness values.

The hardness reference blocks used for indirect verification should conform largely to the workpiece to be tested, in terms of material characteristics and hardness range. For this reason a hardness reference block made of aluminium was developed for the lower hardness range which can not be covered by steel, using new materials technology methods.

CV Instruments hardness reference blocks are used for routine verification and calibration of hardness testing machines, as well as for periodical check and sometimes for overtaking of hardness scales on a hardness testing machine. Regular precision hardness reference blocks are factory calibrated to applicable standards to ensure the functionality and relative reliability and accuracy of measurement of a hardness testing machine.

 

CV instruments Hardness Reference Blocks Features:

CV isbn:1020-CV
Hardness Test Block 5 LFC PTE LTD Logo Hardness Test Block New