If you want to find out more about
Talk to us at :
In metallography process, the next step after the specimen is fitted and properly sized (with any Chennai Metco BAINCUT models) will be to prepare the coarse surface of the specimen. Hence, to flatten the coarse specimen to the finest surface, Chennai Metco belt grinder is the answer. The specimens to be ground in 60, 80 or 120 grit after cutting or moulding operation to remove surface imperfections. Useful step to remove light metallurgical damage in the specimen surface induced during cut-off operation.
After the specimen is fine enough, the next step will be using the Chennai Metco BAINPOL VTD for variable speed Polisher / Grinder of specimen (which can be operated and polished freehand). BAINPOL VTD works to grind and polish finer abrasive particles until the desired surface quality is ready for chemical etching so that metallographic structure of specimen can be observed and measured in detail with Vision engineering TIM5 or digital, optical, or electron microscopy.
Chennai Metco belt grinder features:
1/2HP single phase motor, 1440 RPM
100mm x 915mm Endless belt
Aluminium idler pulley machanism
Easy removable dust cover system
Easy belt change mechanism
Size : 560 x 350 x 250 mm
Please complete the below form to receive further information.