DeFelsko Positector DPMA measures dew point temperature or dewpoint of a workpiece with the addition of wind speed sensory upgrades. This device record temperature at which dew forms and is a measure of atmospheric moisture with the addition of anemometer where the temperature to which air must be cooled at constant pressure and water content to reach saturation. This integrated measurement and records of climatic conditions includes: relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
On site, workpiece of steel structure and alloy material were exposed by climate and natural circumstances which alter the metallugic properties and performance. As such natural cause make the workpiece performs differently, DeFelsko Positector DPM is the solution for any engineer and operator to pinpoint suitable temperature, timing and parameter for treatment of electro coating, painting, remaining life assesment or other application.
Your investment on DeFelsko's PosiTector SPG, will allows your operator to robustly test the Dewpoint and metallurgical behavior of workpiece whether in a workshop or on any manufacturing yard. DeFelsko Positector DPM is the solution for quality control or maintenance and research. With compatibilty and interchangeable dongles and probes with other DeFelsko non destructive tester unit, the DeFelsko Positector DPM allows versatile application which in turns give you the best value for money and practicality in working. For interconnectivity and robust application with smartphones, DeFelsko also inoovating the PosiTector Smartlink series with WIFI technology, smartphone software and handheld design.
DeFelsko Positector DPM features:
Large, easy-to-read, graphics LCD with enhanced one-handed menu navigation
No need to consult complex tables or use a slide rule calculator
Audio and visual alarm – indicates when climate conditions are unsuitable for painting
All readings are constantly updated and displayed simultaneously with every stored measurement is date and time stamped
RESET feature instantly restores factory settings
PosiTector body accepts all PosiTector probes such as 6000. Thus, easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage.
Includes the ambient temperature, surface temperature, and humidity sensors from PosiTector DPM Integral Probe plus a hot wire anemometer
Anemometer mode measures air temperature, relative humidity and wind speed
Auto-rotating display for inverted use
Wind Speed Range: 0-20 m/s, 0-44 mph, 0-65 ft/s, 0-3900 ft/m, 0-72 km/h, 0-38 knots
Wind Speed Accuracy: ± 3% Full Scale
Field calibratable with Celsius/Fahrenheit switchability which conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
Hi Contrast backlit display for bright or dark environments
Flip display enables right-side-up viewing
Uses alkaline or rechargeable batteries (built-in charger)
LFC is the authorized distributor for DeFelsko in Singapore and Indonesia. Contact us to purchase the PosiTector DPM or any other DeFelsko products.
DeFelsko Positector DPMA measures dew point temperature or dewpoint of a workpiece with the addition of wind speed sensory upgrades. This device record temperature at which dew forms and is a measure of atmospheric moisture with the addition of anemometer where the temperature to which air must be cooled at constant pressure and water content to reach saturation. This integrated measurement and records of climatic conditions includes:relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
On site, workpiece of steel structure and alloy material were exposed by climate and natural circumstances which alter the metallugic properties and performance. As such natural cause make the workpiece performs differently, DeFelsko Positector DPM is the solution for any engineer and operator to pinpoint suitable temperature, timing and parameter for treatment of electro coating, painting, remaining life assesment or other application.
Your investment on DeFelsko's PosiTector SPG, will allows your operator to robustly test the Dewpoint and metallurgical behavior of workpiece whether in a workshop or on any manufacturing yard. DeFelsko Positector DPM is the solution for quality control or maintenance and research. With compatibilty and interchangeable dongles and probes with other DeFelsko non destructive tester unit, the DeFelsko Positector DPM allows versatile application which in turns give you the best value for money and practicality in working. For interconnectivity and robust application with smartphones, DeFelsko also inoovating the PosiTector Smartlink series with WIFI technology, smartphone software and handheld design.
DeFelsko Positector DPM features:
Large, easy-to-read, graphics LCD with enhanced one-handed menu navigation
No need to consult complex tables or use a slide rule calculator
Audio and visual alarm – indicates when climate conditions are unsuitable for painting
All readings are constantly updated and displayed simultaneously with every stored measurement is date and time stamped
RESET feature instantly restores factory settings
PosiTector body accepts all PosiTector probes such as 6000. Thus, easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage.
Includes the ambient temperature, surface temperature, and humidity sensors from PosiTector DPM Integral Probe plus a hot wire anemometer
Anemometer mode measures air temperature, relative humidity and wind speed
Field calibratable with Celsius/Fahrenheit switchability which conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
Hi Contrast backlit display for bright or dark environments
Uses alkaline or rechargeable batteries (built-in charger)
LFC is the authorized distributor for DeFelsko in Singapore and Indonesia. Contact us to purchase the PosiTector DPM or any other DeFelsko products.
TECHNICAL SPECIFICATION
DeFelsko Positector DPM Ordering Guide:
All DeFelsko NPM gauges are packed with humidity, air and surface temperature sensors, protective rubber holster with belt clip, wrist strap, 3 AAA batteries, instructions, nylon carrying case with shoulder strap (built-in probe models), hard shell carrying case (cabled probe models), protective lens shield, Long Form Certificate of Calibration traceable to NIST, USB cable, two (2) year warranty.
SIZE: 159 x 61 x 31 mm (6.25" x 2.4" x 1.2")
WEIGHT: 150 g (5.3 oz.) without batteries
Selection of probes:
1.Separate cabled probe:
Includes magnetic surface temperature sensor with armored cable. Ideal for unattended auto logging during work shift or at night.
Includes magnetic mount for rubber holster to attach the instrument onto steel structures.
Accepts other optional K-type sensors including liquid temperature and self-adhering probes.
2. Built-in probe which includes built-in surface temperature sensor
Notes:
A higher dew point indicates more moisture in the air; a dew point greater than 20 °C (68 °F) is considered uncomfortable and greater than 22 °C (72 °F) is considered to be extremely humid. Frost point is the dew point when temperatures are below freezing.
Request a Quote
Request A Quote
Please complete the below form to receive further information.
DeFelsko Positector DPMA With Wind Speed Sensor
Product description:
DeFelsko Positector DPMA measures dew point temperature or dewpoint of a workpiece with the addition of wind speed sensory upgrades. This device record temperature at which dew forms and is a measure of atmospheric moisture with the addition of anemometer where the temperature to which air must be cooled at constant pressure and water content to reach saturation. This integrated measurement and records of climatic conditions includes:relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
On site, workpiece of steel structure and alloy material were exposed by climate and natural circumstances which alter the metallugic properties and performance. As such natural cause make the workpiece performs differently, DeFelsko Positector DPM is the solution for any engineer and operator to pinpoint suitable temperature, timing and parameter for treatment of electro coating, painting, remaining life assesment or other application.
Your investment on DeFelsko's PosiTector SPG, will allows your operator to robustly test the Dewpoint and metallurgical behavior of workpiece whether in a workshop or on any manufacturing yard. DeFelsko Positector DPM is the solution for quality control or maintenance and research. With compatibilty and interchangeable dongles and probes with other DeFelsko non destructive tester unit, the DeFelsko Positector DPM allows versatile application which in turns give you the best value for money and practicality in working. For interconnectivity and robust application with smartphones, DeFelsko also inoovating the PosiTector Smartlink series with WIFI technology, smartphone software and handheld design.
DeFelsko Positector DPM features:
Large, easy-to-read, graphics LCD with enhanced one-handed menu navigation
No need to consult complex tables or use a slide rule calculator
Audio and visual alarm – indicates when climate conditions are unsuitable for painting
All readings are constantly updated and displayed simultaneously with every stored measurement is date and time stamped
RESET feature instantly restores factory settings
PosiTector body accepts all PosiTector probes such as 6000. Thus, easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage.
Includes the ambient temperature, surface temperature, and humidity sensors from PosiTector DPM Integral Probe plus a hot wire anemometer
Anemometer mode measures air temperature, relative humidity and wind speed
Field calibratable with Celsius/Fahrenheit switchability which conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.
Hi Contrast backlit display for bright or dark environments