If you want to find out more about

Leak Tester CETATEST H 201

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

CETA Testsysteme GmbH are developing CETATEST H 201 to cater with industry of which the cycle line are cannot be tested by compressed air and should be waterproof, oil-tight or gas proof. The CETATEST H 201 using compressed mix of hydrogen gas within particular cycle of components. the test medium forming gas (5 % hydrogen, 95 % nitrogen) to detect untight parts, test leakage and detection  data. CETATEST H 201 offer the benefits that the mixed gas hydrogen is a colorless, odorless, tasteless, non-toxic, nonmetallic and much cheaper alternatives compared with other test method such as helium. The mix of Nitrogen and Hydrogen is also high molecular velocity hence spreads quickly in a given volume of cycle, no residue, flushed out faster, and can be operated fully automatic without delay. CETATEST H 201 can be optimized to work range for chemically sensitive workpiece, cleanroom operation which cannot be tested by compressed air and should be waterproof, oil-tight or gas proof as in semiconductor housing, sensors, any oil and gas tank quality inspection, Aerospace engine parts, food and beverages packaging, turbocharger units, liquid - pharmacy medical packaging, Industrial-factory engine coolant, internal combustion engines and various other industry.   Leak Tester CETATEST H 201 Features: Hydrogen sensor with fully automated measurement for pass fail quality control and testing. Due to clean properties of hydrogen, the maintenance and care for daily operational of CETATEST H 201 is minimal. 1,000 ppm (resolution: 0.1 ppm) Filling pressure range is 12 bar, alternatively upto 100 bar (relative) Much cheaper and safer alternative than Helium gas Suitable for chemically sensitive workpiece, cleanroom operation which cannot be tested by compressed air and should be waterproof, oil-tight or gas proof as in semiconductor housing, sensors and many more   To serve your interest on Leak Tester CETATEST H 201, kindly contact our sales department.

CETA Testsysteme GmbH are developing CETATEST H 201 to cater with industry of which the cycle line are cannot be tested by compressed air and should be waterproof, oil-tight or gas proof. The CETATEST H 201 using compressed mix of hydrogen gas within particular cycle of components. the test medium forming gas (5 % hydrogen, 95 % nitrogen) to detect untight parts, test leakage and detection  data.

CETATEST H 201 offer the benefits that the mixed gas hydrogen is a colorless, odorless, tasteless, non-toxic, nonmetallic and much cheaper alternatives compared with other test method such as helium. The mix of Nitrogen and Hydrogen is also high molecular velocity hence spreads quickly in a given volume of cycle, no residue, flushed out faster, and can be operated fully automatic without delay. CETATEST H 201 can be optimized to work range for chemically sensitive workpiece, cleanroom operation which cannot be tested by compressed air and should be waterproof, oil-tight or gas proof as in semiconductor housing, sensors, any oil and gas tank quality inspection, Aerospace engine parts, food and beverages packaging, turbocharger units, liquid - pharmacy medical packaging, Industrial-factory engine coolant, internal combustion engines and various other industry.

 

Leak Tester CETATEST H 201 Features:

  • Hydrogen sensor with fully automated measurement for pass fail quality control and testing.
  • Due to clean properties of hydrogen, the maintenance and care for daily operational of CETATEST H 201 is minimal.
  • 1,000 ppm (resolution: 0.1 ppm)
  • Filling pressure range is 12 bar, alternatively upto 100 bar (relative)
  • Much cheaper and safer alternative than Helium gas
  • Suitable for chemically sensitive workpiece, cleanroom operation which cannot be tested by compressed air and should be waterproof, oil-tight or gas proof as in semiconductor housing, sensors and many more

 

To serve your interest on Leak Tester CETATEST H 201,

kindly contact our sales department.

TECHNICAL SPECIFICATION

Leak Tester CETATEST H 201 Ordering Guide:

 

Sensor type

hydrogen sensor

Measurement range

1,000 ppm (resolution: 0.1 ppm)

Result units

psi, ml/min, l/h, mbar*l/s, alternatively concentration in ppm

Filling pressure range

12 bar, alternatively upto 100 bar (relative)

Test pressure range

air pressure

Test modes

integral test, inverse integral test, blind hole test

Dimensions

450 mm x 178 mm x330 mm (W x H x D)

Two channel operation

as option available

Typical applications

Components which cannot be tested by compressed air and should be waterproof, oil-tight or gas proof

 

To serve your interest on Leak Tester CETATEST H 201,

kindly contact our sales department.

Request a Quote

Request A Quote

Please complete the below form to receive further information.

Leak Tester CETATEST H 201 Leak Tester CETATEST H 201 Product description:

CETA Testsysteme GmbH are developing CETATEST H 201 to cater with industry of which the cycle line are cannot be tested by compressed air and should be waterproof, oil-tight or gas proof. The CETATEST H 201 using compressed mix of hydrogen gas within particular cycle of components. the test medium forming gas (5 % hydrogen, 95 % nitrogen) to detect untight parts, test leakage and detection  data.

CETATEST H 201 offer the benefits that the mixed gas hydrogen is a colorless, odorless, tasteless, non-toxic, nonmetallic and much cheaper alternatives compared with other test method such as helium. The mix of Nitrogen and Hydrogen is also high molecular velocity hence spreads quickly in a given volume of cycle, no residue, flushed out faster, and can be operated fully automatic without delay. CETATEST H 201 can be optimized to work range for chemically sensitive workpiece, cleanroom operation which cannot be tested by compressed air and should be waterproof, oil-tight or gas proof as in semiconductor housing, sensors, any oil and gas tank quality inspection, Aerospace engine parts, food and beverages packaging, turbocharger units, liquid - pharmacy medical packaging, Industrial-factory engine coolant, internal combustion engines and various other industry.

 

Leak Tester CETATEST H 201 Features:

 

To serve your interest on Leak Tester CETATEST H 201,

kindly contact our sales department.

Leak isbn:1020-Leak
Leak Tester 5 LFC PTE LTD Logo Leak Tester New