If you want to find out more about

Shimpo Wire Clamp Force Gauge Jig FGTT-25

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

Shimpo Wire Clamp Force Gauge Jig FGTT-25 is devised for firmly holding a test specimen with up to 500 Newton, which are suitable for pulling wire, cables, rubber belt, ropes within a the touch of a lever. This self-tightening mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Wire Clamp Force Gauge Jig FGTT-25 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well.  Shimpo Wire Clamp Force Gauge Jig FGTT-25 features: High-speed force measurement with sampling rate of 1000 times per second. Compatible gauge attachement with Shimpo FGJN-1~50, FGP-1~50 and FGPX-1~50. Suitable for clamping wires, cables, rubber, smaller chains and many more.

Shimpo Wire Clamp Force Gauge Jig FGTT-25 is devised for firmly holding a test specimen with up to 500 Newton, which are suitable for pulling wire, cables, rubber belt, ropes within a the touch of a lever. This self-tightening mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.

You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Wire Clamp Force Gauge Jig FGTT-25 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. 

Shimpo Wire Clamp Force Gauge Jig FGTT-25 features:

  • High-speed force measurement with sampling rate of 1000 times per second.
  • Compatible gauge attachement with Shimpo FGJN-1~50, FGP-1~50 and FGPX-1~50.
  • Suitable for clamping wires, cables, rubber, smaller chains and many more.

TECHNICAL SPECIFICATION

Shimpo Wire Clamp Force Gauge Jig FGTT-25 Ordering Guide:

 
型式 / Product number FGTT-25
 試験方向 / Operating direction 引張り / Pulling
 許容荷重 / Maximal load 500N
 開き幅 / Open width 5mm

 取付可能フォースゲージ

Compatible With All Shimpo Force Gauge

FGJN-1~50
FGP-1~50
FGPX-1~50 
 質量 / Weight 約500g

 

Request a Quote

Request A Quote

Please complete the below form to receive further information.

Shimpo Wire Clamp Force Gauge Jig FGTT-25 Shimpo Wire Clamp Force Gauge Jig FGTT-25 Product description:

Shimpo Wire Clamp Force Gauge Jig FGTT-25 is devised for firmly holding a test specimen with up to 500 Newton, which are suitable for pulling wire, cables, rubber belt, ropes within a the touch of a lever. This self-tightening mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.

You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Wire Clamp Force Gauge Jig FGTT-25 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. 

Shimpo Wire Clamp Force Gauge Jig FGTT-25 features:

Shimpo isbn:1020-Shimpo
Fixtures & Jigs 5 LFC PTE LTD Logo Fixtures & Jigs New