If you want to find out more about
Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 is devised to firmly holding a test specimen with up to 1000 Newton, which are suitable for testing tensile and tightness of crimped joint on various solderless connection. This solderless terminals can be easily and securely set to measure of various sizes of electric wires within a single fixture. allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. You simply attach the tested wire of various thickness through its groove and let the terminal get caught with it. You can also clamp the lower end part of the specimen with regular locking vise or used in combination with a Shimpo Wire Clamp Force Gauge Jig FGTT-25 and attach the upper part to the force gauge connecting pin. Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 is highly recommended by wire harness industry for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 features: Solderless terminals can be easily and securely set. Measurement of various sizes of electric wires can be done with a single fixture. To be used in combination with a Shimpo Wire Clamp Force Gauge Jig FGTT-25. Compatible gauge attachement with Shimpo FG-1～100.
Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 is devised to firmly holding a test specimen with up to 1000 Newton, which are suitable for testing tensile and tightness of crimped joint on various solderless connection. This solderless terminals can be easily and securely set to measure of various sizes of electric wires within a single fixture. allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.
You simply attach the tested wire of various thickness through its groove and let the terminal get caught with it. You can also clamp the lower end part of the specimen with regular locking vise or used in combination with a Shimpo Wire Clamp Force Gauge Jig FGTT-25 and attach the upper part to the force gauge connecting pin. Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 is highly recommended by wire harness industry for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well.
Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 features:
- Solderless terminals can be easily and securely set.
- Measurement of various sizes of electric wires can be done with a single fixture.
- To be used in combination with a Shimpo Wire Clamp Force Gauge Jig FGTT-25.
- Compatible gauge attachement with Shimpo FG-1～100.
TECHNICAL SPECIFICATION
Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 Dimension:
Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28 Ordering Guide:
| 型式 / Product number |
FGTT-28 |
| 試験方向 / Operating direction | 引張り / Pulling |
| 許容荷重 / Maximal load | 1000N |
| 開き幅 / Open width | 1 - 8 mm |
|
取付可能フォースゲージ Compatible With All Shimpo Force Gauge |
FGJN-1～100 FGP-1～100 FGPX-1～100 |
| 質量 / Weight | 約500g |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
