If you want to find out more about
Kinkelder CIrcular Saw HSS Eclipse
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Kinkelder CIrcular Saw HSS Eclipse Due to a sophisticated PVD coating for wear protection which achieves a very low friction coefficient, the Eclipse saw blade is a cost-efficient solution for cutting structural and non-alloy tool steel thin-walled tubes. When cutting tubes and profiles on manual and semi-automatic sawing machines, Eclipse allows a higher cutting speed than a steam-treated saw blade. It can even be used for cutting thin-walled tubes on automatic machines. Eclipse is also very suitable for cutting stainless steel tubes and profiles. Kinkelder HSS Eclipse Features: Maximum cutting speed = 140 m/min. Average speeds of 60-120 m/min can be used. Feed rates: 0,03 -0,09 mm/tooth. Kinkelder HSS Eclipse User Benefits: Higher blade life Increased uptime Lower cost per cut Little to no side pick-up Higher production output Ideal for cutting both structural- and stainless steel Kinkelder HSS Eclipse Applications: All structural steel and non-alloy steel thin-walled tubes Tensile strength up to 600 N/mm2 Steel – Suggested cutting speed: 60 – 120 m/min Austenitic stainless steel (300 series) – Suggested cutting speed: 30 – 50 m/min – Blade life:≈1m2 Ferritic w/o Ti (409 & 412) – Suggested cutting speed: 220 – 260 m/min – blade life: ≈1m2 Ferritic with Ti (441) – Suggested cutting speed: 60 – 120 m/min Machines: manual, semi-automatic, automatic, flying cut-off applications
Kinkelder CIrcular Saw HSS Eclipse
Due to a sophisticated PVD coating for wear protection which achieves a very low friction coefficient, the Eclipse saw blade is a cost-efficient solution for cutting structural and non-alloy tool steel thin-walled tubes. When cutting tubes and profiles on manual and semi-automatic sawing machines, Eclipse allows a higher cutting speed than a steam-treated saw blade. It can even be used for cutting thin-walled tubes on automatic machines. Eclipse is also very suitable for cutting stainless steel tubes and profiles.
Kinkelder HSS Eclipse Features:
- Maximum cutting speed = 140 m/min.
- Average speeds of 60-120 m/min can be used.
- Feed rates: 0,03 -0,09 mm/tooth.
Kinkelder HSS Eclipse User Benefits:
- Higher blade life
- Increased uptime
- Lower cost per cut
- Little to no side pick-up
- Higher production output
- Ideal for cutting both structural- and stainless steel
Kinkelder HSS Eclipse Applications:
- All structural steel and non-alloy steel thin-walled tubes
- Tensile strength up to 600 N/mm2
- Steel – Suggested cutting speed: 60 – 120 m/min
- Austenitic stainless steel (300 series) – Suggested cutting speed: 30 – 50 m/min – Blade life:≈1m2
- Ferritic w/o Ti (409 & 412) – Suggested cutting speed: 220 – 260 m/min – blade life: ≈1m2
- Ferritic with Ti (441) – Suggested cutting speed: 60 – 120 m/min
- Machines: manual, semi-automatic, automatic, flying cut-off applications
Overview
Build to last
Since 1960, Kinkelder manufactures and pioneer of cutting blade technology in Netherlands. Kinkelder provides cutting solution through R&D, consultancy and after sales for your long lasting productivity and profitability
Customer Value
Kinkelder BV has been an ISO certified company since 1999. On 2014 Kinkelder's quality management were updated to conform with ISO 9001:2008 standard. Kinkelder's relentless commitment will accompany your company in unlocking higher level of efficiency & productivity
TECHNICAL SPECIFICATION
Kinkelder HSS Eclipse Typical Application Examples:
|
Material
|
Dimensions (mm) |
Cutting speed (m/min) |
Cutting time (s) |
Blade life (cuts) |
Blade Life (m2) |
| Tube, S235 | 18 x 1.6 | 180 | 0.4 | 35.000 | 3.0 |
| Tube, S235 | 25 x 2.0 | 140 | 0.9 | 25.000 | 3.6 |
| Tube, S235 | 40 x 4.0 | 70 | 3.96 | 5.000 | 2.2 |
| Tube, S275 | 60 x 2.6 | 120 | 2.7 | 5.000 | 2.6 |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
