If you want to find out more about

Shimpo Stroboscope DT-311N

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

Shimpo Stroboscope DT-311N is devised by Nidec-Shimpo to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially towards fast moving and flowing object. Shimpo Stroboscope DT-311N is suitable for The flashes enable high-accuracy rotational speed measurement and stop motion analysis. Shimpo Stroboscope DT-311N is AC-powered version for use hand-held or can be fixed-mounted using a fixture or tripod. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. The device provides a wide measuring range from 40.0 to 35,000 rpm. These features make the DT-315N ideal for quality inspection and preventitive maintenance of automated motion equipment. The Shimpo Stroboscope DT-311N is highly regarded by end user in measuring fan shaft, eccentric exercise, turbo engine and other high-speed operation, engines, gears, pulleys, printing industry, textile industry, electronic industry, and various other industrial production. However, if you are looking for stroboscope for battery operated application with the same resolution, you might also want to consider Shimpo Heavy-duty Stroboscope DT-315N. Shimpo Stroboscope DT-311N Features: The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm. Provided with a phase adjustment function makes you possible to move an image while maintaining synchronization. Aluminum construction provides exceptional durability The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals. Provided with a memory function as the flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time. High polish and focused light reflector eliminates “blind” viewing areas Pistol grip design offer ergonomic handling and adds versatile application Continuous duty cycle eliminates need to shut down for cooling Phase shift allows visual analysis of rotating/reciprocating objects High accuracy ( ±0.01% of reading ) is ideal for QC inspection and process control Synchronous output enables strobe to drive other strobes Flash timer control conserves flash tube life Easy tri-pod or permanent mounting with mounting thread

Shimpo Stroboscope DT-311N is devised by Nidec-Shimpo to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially towards fast moving and flowing object. Shimpo Stroboscope DT-311N is suitable for The flashes enable high-accuracy rotational speed measurement and stop motion analysis. Shimpo Stroboscope DT-311N is AC-powered version for use hand-held or can be fixed-mounted using a fixture or tripod. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. The device provides a wide measuring range from 40.0 to 35,000 rpm. These features make the DT-315N ideal for quality inspection and preventitive maintenance of automated motion equipment.

The Shimpo Stroboscope DT-311N is highly regarded by end user in measuring fan shaft, eccentric exercise, turbo engine and other high-speed operation, engines, gears, pulleys, printing industry, textile industry, electronic industry, and various other industrial production. However, if you are looking for stroboscope for battery operated application with the same resolution, you might also want to consider Shimpo Heavy-duty Stroboscope DT-315N.

Shimpo Stroboscope DT-311N Features:

  • The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.
  • Provided with a phase adjustment function makes you possible to move an image while maintaining synchronization.
  • Aluminum construction provides exceptional durability
  • The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.
  • Provided with a memory function as the flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.
  • High polish and focused light reflector eliminates “blind” viewing areas
  • Pistol grip design offer ergonomic handling and adds versatile application
  • Continuous duty cycle eliminates need to shut down for cooling
  • Phase shift allows visual analysis of rotating/reciprocating objects
  • High accuracy ( ±0.01% of reading ) is ideal for QC inspection and process control
  • Synchronous output enables strobe to drive other strobes
  • Flash timer control conserves flash tube life
  • Easy tri-pod or permanent mounting with mounting thread

TECHNICAL SPECIFICATION

 Shimpo Stroboscope Shimpo DT-311N details compared with DT-311P :

 
形式 Models & Dimension
Shimpo DT-311N / 185×120×120mm
Shimpo DT-315N / 250×120×120mm
発光回数 Light flashing rates (rpm) 40.0~35000 外部同期モードの場合は0~35000 / 40.0 to 35,000 external synchronization mode 0-35000

内部発振
モード

Internal oscillation
mode

表示分解機能

Display function

0.1:40.0~5000
0.2:~8000
0.5:~10000
1:~35000

ジャンプ機能

Jump function

有(専用スイッチを押すと発光回数が1/2倍、2倍になる)

Available

(1/2 times the number of times the light-emitting pressing the dedicated switch, become a factor of 2)

整数機能

Integer function

有(小数を表示、設定しない)

Yes (display the decimal, not set)       

メモリ機能

Memory function

有(電源OFF時の発光回数を記憶し、次に電源をONしたときにその発光回数で発光する)

Yes (storing the number of times of light emission at the time of power OFF,

then emits light with the light emitting number of times when you turn ON the power supply)

外部同期
モード

入力信号

Power impedance

電圧入力 H level:2.5V~12V
L level:0.8V MAX
パルス幅50μs以上
入力インピーダンス10kΩ以上

Voltage input H level: 2.5V ~ 12V
L level: 0.8V MAX
Or more pulse width 50μs
Input impedance 10kΩ or more

速度測定機能

Speed measurement function

40.0~35000rpm(遅延発光時には無効)

遅延発光

Delayed luminescence

40.0~10000rpmの範囲で、0~359° 
1°毎に遅れ角度を設定可能または、
0~2000ms 1ms毎に遅れ時間を設定可能

In the range of 40.0 ~ 10000rpm, 0 ~ 359 °
Set the delay angle for each 1 ° possible or,
0 to 2000ms 1ms every delay can be set time

表示器 LED indicator 5桁赤色LED7セグメント 5-digit red LED7 segment

同期出力信号

Synchronization output signal

12V電圧信号 パルス幅 約400μs

12V voltage signal pulse width of about 400μs

設定器 Setter 多回転エンコーダ、タクトスイッチ Multi-turn encoder, tact switch
閃光源 Flash source キセノンランプ Xenon lamp
ランプ入力 Lamp wattage 10W (Strobe 100,000,000)
Strobe duration 10-40μsec
電源 Power input

AC100~120V

Can also be supplied with 230V

充電式(専用ニカド電池)
連続約1時間発光または、
付属ACアダプタg(2時間急速充電)
AC100V±10%

Rechargeable (only nickel-cadmium batteries)
Continuously for approximately one hour emission or,
The included AC adapter g (2 hours quick charge)
AC100V ± 10%

発光タイマ Emission timer

連続点灯または、1~120分の設定時間経過後に発光を停止

Continuous lighting or, stop the issued after the lapse of one to 120 minutes of setting time

センサ用電源出力

Power adaptor output

DC12V 40mA
電源コード Power cord 2.4m
使用温度 Operating temperature 0~40℃
質量 Weight 1.2kg 2.1kg
付属品 Dedicated adapter ピストルグリップ 専用アダプタ

 

Request a Quote

Request A Quote

Please complete the below form to receive further information.

Shimpo Stroboscope DT-311N Shimpo Stroboscope DT-311N Product description:

Shimpo Stroboscope DT-311N is devised by Nidec-Shimpo to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially towards fast moving and flowing object. Shimpo Stroboscope DT-311N is suitable for The flashes enable high-accuracy rotational speed measurement and stop motion analysis. Shimpo Stroboscope DT-311N is AC-powered version for use hand-held or can be fixed-mounted using a fixture or tripod. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. The device provides a wide measuring range from 40.0 to 35,000 rpm. These features make the DT-315N ideal for quality inspection and preventitive maintenance of automated motion equipment.

The Shimpo Stroboscope DT-311N is highly regarded by end user in measuring fan shaft, eccentric exercise, turbo engine and other high-speed operation, engines, gears, pulleys, printing industry, textile industry, electronic industry, and various other industrial production. However, if you are looking for stroboscope for battery operated application with the same resolution, you might also want to consider Shimpo Heavy-duty Stroboscope DT-315N.

Shimpo Stroboscope DT-311N Features:

Shimpo isbn:1020-Shimpo
Stroboscope 5 LFC PTE LTD Logo Stroboscope New