If you want to find out more about
Talk to us at :
Shimpo Tachometer DT-10x is devised by Nidec-Shimpo as a durable tachometer with the convenience of handheld portability. You can perform a non-contact basis testing from a position separated from the center of rotation of the object to be measured. Values can be converted and displayed in various units such as rpm, m, yards, feet, and inches. The LCD can display a five-digit value with a digit height of 12 mm. In addition to measured values, units and other information can be displayed. It can store maximum, minimum, and last-measured values plus 10 other measurements.
Shimpo Tachometer DT-10x Series are commonly used in measuring actual lathe torque on threading and turning, machining velocity, rate of inflation, quality inspection on electric motors, maintenance and many more.
All Shimpo Tachometer DT-10x Series are supplied as a complete kit including the tachometer, reflective tape, screw-in contact adapter, 2 cone tips, funnel tip, shaft extension, surface speed wheel, two AA batteries and an operating instruction manual - all supplied in a foam-fitted carrying case.
Shimpo Tachometer DT-10x Series features:
Shimpo Tachometer DT-10x Series Ordering Guide:
|DT - 105A||DT - 107A|
|Measuring Range||0.10 1 25,000 RPM with floating decimal|
±0.06 RPM : 0.10 - 999.9 RPM
|Display||5 digit 0.47" (12mm) high LCD||5 digit 0.4" (10mm) high LED|
|Measuring Units||Revolutions: RPH, RPM Feet: FPH, FPM Miles: MPH
Yards: YPH. YPM Inches: IPM Meters: mPH, mPM
Length: m, cm, inches, feet, yards Total Revolutions: REV
|Memory||13 readings are stored in memory and retained for 5 minutes (last, max., min. and 10 extra measurements)|
|Display Update Time||1 second (typical)|
|Detection||Optical coupler, 60 pulses/rev.|
|System Control||Single-chip C-MOS microprocessor|
|Over Range Indicator||Flashing numerals|
|Voltage Requirement||2AA 1.5V batteries|
|Low Battery Indicator||Flashing "LO BAT" display||"B" display|
|Auto Power Shut-Off||Yes|
|Battery Life||45 - 60 hrs approx.||25 hrs approx.|
|Operating Temperature Range||32° - 113° F (0 - 45° C)|
|Construction||Die-cast aluminum housing|
|Dimensions||7.2" L x 2.4" W x 1.8" H (182.5mm x 60mm x 46mm)|
|Standard Accessories||2 cone adaptors, 1 funnel adaptor, 1 3-1/2" extension shaft, (NIST certificate), carrying case, 1 master wheel (6" cir.)|
|Optional Accessories||Wire/yarn fixture, cone adaptor, funnel adaptor, extension shaft, 6" measuring wheel, 12" measuring wheel|
When the speed of High Speed targeted item, length measurement is to be done, it is recommended that 12Model Foil may be used.
Please complete the below form to receive further information.