The Swiss-made Sylvac Optical Measuring Scan F60L works using the drop shadow principle; the device makes an optical scan of the component to produce a highly magnified, high-resolution image, on which it measures dimensions such as lengths, diameters, angles, radii, threads, etc. There is also a component rotation system so that any form errors such as runout, cylindricity, etc. can be measured. You can also use this device for an improvised gauging rig with Sylvac's gauging multiplexer software. The Sylvac Optical Measuring Scan F60L is suitable for the first-off part, control in the process (SPC), sampling, or 100% inspection. The system incorporates the highest resolution CCD sensors that combine 2 x 7.000 elements linear arrays, with a patented 7.5° system, which would correspond to a camera with a resolution of 200 megapixels. As the part profile is projected, these sensors, capable of detecting the slightest changes at the pixel level, act as a light-sensitive rule. The contour of the workpiece is reproduced in shadow images on the software. All the various elements shown can be measured in static (without part rotation) or dynamic (with part rotation) when geometrical features such as run-out or concentricity must be measured. Your investment in the new Sylvac S-Scan F60L Optical Measuring Machine will unlock a higher level of precision without the additional cost of human resources. Compared to conventional bench center, traditional jig which relies on operator expertise and consumables such as dial gauge to operate, Sylvac S-Scan F60L optical measuring machine give you a competitive edge with the instant return, especially when working on critical cylindrical concentricity components, such as aerospace drive shaft, electrical motors, drills and cutting tools, automotive shafts, medical device, connectors, dental screws and implants, hydraulics parts, rollers, turbines parts, CNC turned parts, etc. Sylvac Non-Contact Optical Measuring Scan F60L Features: Zero consumable Ultimate Precision Scanner For Critical Cylindrical Components range up to Ø 60mm diameter and 500mm length, with or without rotary headstock Suitable upgrade for your old profile projector, optical measuring scope, bench center, and multi-gauging bench. For automatic measurement, simply put the workpiece on the S-SCAN machine, press the button and let the Sylvac Non-Contact Optical Measuring Scan F60 scan all the values automatically without any pre-programing necessary. Higher precision than manual measurements such as conservative bench center, and precision comparator jig and also has the advantage of being automatic, reducing irregularity caused by human factors. Faster auto-calibration for daily routines without fiddly setup and costly multi-gauge maintenance and calibration fee as with conventional measuring systems. Delivered with software Sylvac Reflex Click, the measuring system that makes everyone an expert! Single inspection reports promised faster workflow, compared to jigs and bench centers which combine various instruments and equipment items to check all the parameters. On request, an automatic feed robot can be linked to the machine to create an automatic inspection unit that does not require an operator.  Sylvac Non-Contact Optical Measuring Scan F60L On Standard Delivery: The instrument according to technical specifications 2 male centers Computer, Mouse, Keyboard, Screen, Windows multilingual operating system Manual book Reflex-Scan Software The rotary headstock (model 902-5521 only)    

The Swiss-made Sylvac Optical Measuring Scan F60L works using the drop shadow principle; the device makes an optical scan of the component to produce a highly magnified, high-resolution image, on which it measures dimensions such as lengths, diameters, angles, radii, threads, etc. There is also a component rotation system so that any form errors such as runout, cylindricity, etc. can be measured. You can also use this device for an improvised gauging rig with Sylvac's gauging multiplexer software.

The Sylvac Optical Measuring Scan F60L is suitable for the first-off part, control in the process (SPC), sampling, or 100% inspection. The system incorporates the highest resolution CCD sensors that combine 2 x 7.000 elements linear arrays, with a patented 7.5° system, which would correspond to a camera with a resolution of 200 megapixels. As the part profile is projected, these sensors, capable of detecting the slightest changes at the pixel level, act as a light-sensitive rule. The contour of the workpiece is reproduced in shadow images on the software. All the various elements shown can be measured in static (without part rotation) or dynamic (with part rotation) when geometrical features such as run-out or concentricity must be measured.

Your investment in the new Sylvac S-Scan F60L Optical Measuring Machine will unlock a higher level of precision without the additional cost of human resources. Compared to conventional bench center, traditional jig which relies on operator expertise and consumables such as dial gauge to operate, Sylvac S-Scan F60L optical measuring machine give you a competitive edge with the instant return, especially when working on critical cylindrical concentricity components, such as aerospace drive shaft, electrical motors, drills and cutting tools, automotive shafts, medical device, connectors, dental screws and implants, hydraulics parts, rollers, turbines parts, CNC turned parts, etc.

Sylvac Non-Contact Optical Measuring Scan F60L Features:

• Zero consumable
  
• Ultimate Precision Scanner For Critical Cylindrical Components range up to Ø 60mm diameter and 500mm length, with or without rotary headstock
• Suitable upgrade for your old profile projector, optical measuring scope, bench center, and multi-gauging bench.
• For automatic measurement, simply put the workpiece on the S-SCAN machine, press the button and let the Sylvac Non-Contact Optical Measuring Scan F60 scan all the values automatically without any pre-programing necessary.
• Higher precision than manual measurements such as conservative bench center, and precision comparator jig and also has the advantage of being automatic, reducing irregularity caused by human factors.
• Faster auto-calibration for daily routines without fiddly setup and costly multi-gauge maintenance and calibration fee as with conventional measuring systems.
  
• Delivered with software Sylvac Reflex Click, the measuring system that makes everyone an expert!
• Single inspection reports promised faster workflow, compared to jigs and bench centers which combine various instruments and equipment items to check all the parameters.
• On request, an automatic feed robot can be linked to the machine to create an automatic inspection unit that does not require an operator. 

Sylvac Non-Contact Optical Measuring Scan F60L On Standard Delivery:

• The instrument according to technical specifications
• 2 male centers
• Computer, Mouse, Keyboard, Screen, Windows multilingual operating system
• Manual book
• Reflex-Scan Software
• The rotary headstock (model 902-5521 only)