Contact Us

• 

If you want to find out more about

Shimpo Solder Test Force Gauge Jig FGT-10-90

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

Shimpo Solder Test Force Gauge Jig FGT-10-90 is devised for firmly holding a test specimen conform to JIS Z 3198-7. With large mounting area of 150 × 200 mm, you can test and mount various shapes of circuit boards within its lever. Its heavy duty mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. You can easily also clamp the specimen by its xy mechanism and attached it the force gauge's connecting pin. Shimpo Solder Test Force Gauge Jig FGT-10-90 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this durable clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. However if you are considering a clamp with 250 Newton of force is appropriate, you might also wants to consider Shimpo Wedge Grips Force Gauge Jig GC-50.   Shimpo Solder Test Force Gauge Jig FGT-10-90 features: Minute adjustments in position are possible in the x and y directions. Having a large mounting area (150 × 200 mm), circuit boards of various shapes can be mounted. Compatible gauge attachement with all Shimpo force gauge such as FGJN-1～50, FGP-1～50 and FGPX-1～50. Suitable tensile rupture tests on solder joint, peel test of PCB components and many more.  

Shimpo Solder Test Force Gauge Jig FGT-10-90 is devised for firmly holding a test specimen conform to JIS Z 3198-7. With large mounting area of 150 × 200 mm, you can test and mount various shapes of circuit boards within its lever. Its heavy duty mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.

You can easily also clamp the specimen by its xy mechanism and attached it the force gauge's connecting pin. Shimpo Solder Test Force Gauge Jig FGT-10-90 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this durable clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. However if you are considering a clamp with 250 Newton of force is appropriate, you might also wants to consider Shimpo Wedge Grips Force Gauge Jig GC-50.

Shimpo Solder Test Force Gauge Jig FGT-10-90 features:

• Minute adjustments in position are possible in the x and y directions.
• Having a large mounting area (150 × 200 mm), circuit boards of various shapes can be mounted.
• Compatible gauge attachement with all Shimpo force gauge such as FGJN-1～50, FGP-1～50 and FGPX-1～50.
• Suitable tensile rupture tests on solder joint, peel test of PCB components and many more.

Related Products

Shimpo Film Grips Force Gauge Jig GC-2-5

SPG High Precision Inspection & Assembly Jigs

Shimpo Tape Grips Force Gauge Jig GC-60

Moore & Wright Vee Block Standard Pairs 200 Series

Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8)

Shimpo Wedge Grips Force Gauge Jig GC-50

Shimpo Wire Terminal Test Fixture Set FG-M6WTER100

Shimpo Multi-terminal Grips Force Gauge Jig FGTT-28