If you want to find out more about
Talk to us at :
The CETATEST 815 is a fully automatic working leak tester for the detection of leaking parts within the cycle time of the production process. This highly accurate leak pressure tester works on a similar method to Leak Tester CETATEST 715, which compares the deviation value in the test part volume with the pressure in a tight reference volume (differential measure method). Ceta Leak Tester CETATEST 815 works precisely by using mechanical and electrical sensing of inputs from its one channel air compressor with at least of 6 - 10 bar and 0.5 bar above test pressure resp. 50 mbar under evacuation pressure (ISO 8573-1) towards the workpiece in such a way that your product can be tested on production line (with or without testing jig).
The cost-effective CETATEST 815 leak detector also provide data output via USB which then can be conveniently saved into a USB flash drive for traceable data record or further analysis of acceptable parameter via CETA PC software and spreadsheet as well its parameter can be exported or imported using an USB storage device. Measurement series and measurement curves can also be stored.
The CETATEST 815 can be equipped with a multitude of test modes and is applicable for a lot of applications. The 24 Bit AD converter allows for a high clock rate at shorter test times. Due to its reliable accuracy within an automatic approach, this instrument's versatility is highly regarded by research and development lab, universities, inspection of components that should be waterproof, oil-tight or gas proof sanitary armatures, plastic weldings, ball valves, from any oil and gas tank quality inspection, aerospace engine parts, food and beverages packaging, automotive turbocharger units, liquid - pharmaceutical packaging, medical equipment, mechatronics, pneumatic workpiece and many more.
Leak Tester CETATEST 815 Features:
Piezo-resistive gauge pressure sensor
Measurement range of ± 500 Pa, ± 5,000 Pa in 1 Pa-steps)
Unit of measurements are Pa, hPa, Pa/s, hPa/s, psi, psi/s, ml/min, ml/h, l/min, mbar l/s
Can also be combined with mechanical pressure regulator and other set of pressure gauge as well.
Input of compressed air supply with 6 mm plug-in fitting and optionally up to three pneumatically driven outputs.
Ideal test pressure range are: -1 bar, 200 mbar, 1 bar, 10 bar with test mode of: Pressure loss measurement, dynamic pressure test (option), test of closed components (option).
Delivered with with CE certificate and DAkkS calibration certificate without additional cost.
Detailed result statistics, cycle counter, indicator for service intervals, countdown indicator, registration of parameter change, recording of measurement series and measurement curves, Dynamic Link Library (DLL) for RS-232 interface programming.
Can be delivered as 2 channel test devices.
Optimized for leak testing of various test parts of high precision in high speed production cycles.
Leak Tester CETATEST 815 Ordering Guide:
|Operating method||One channel operation|
|Signal processing||Fast 24-Bit-A/D-Converter (internal resolution: effective 0.01 Pa)Real-time processing of the measurement signals|
|Valve types||Depending on the application: sliding valve or poppet valve|
|Processing||Real time microcontroller system, 16-Bit µC / 40 MHz|
|Sensors||Differential pressure sensor, relative pressure sensor|
|Measurement ranges||± 500 Pa / ± 5,000 Pa (displayed resolution: 1 Pa); other ranges on request|
|Result units||Pa, hPa, psi, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h|
|Electronically regulated test pressure ranges||-1 bar, 200 mbar, 1 bar, 6 bar, 10 bar, 20 bar, 30 barnegative gauge pressure and positive gauge pressure ranges can be combined, other pressures and mechanical pressure regulator on request|
|Test modes||Pressure lossOptional: sealed component, RAM pressure, pressure steps, pressure rise (with double leak connector)|
|Test options||Prefill (multiple filling), program series, smooth filling, analysis of the filling and stabilizing curve, consecutive zero results, temperature compensation, variable zero point, test repetition/automatic test time adjustment, free programmable control valves for each program|
|System control||Still-Alive-Check with differential pressure sensor control, patented automatic function control (option), control of the compressed air supply|
|Programmable test phases||Delay, pre-filling, filling, stabilizing, measuring, venting; reservoir filling, re-filling|
|Test mode specific limits||Prefill pressure, filling pressuretest part specific reject and rework levels|
|Handling||Intuitive menu including password protected user levels|
|Parameter memory||64 individual parameter driven test programs with alpha-numeric program namesParameters of the test programs can be exported resp. imported via the test device interfaces or by usage of a USB storage device|
|Power supply and Power consumption||100 – 240 V AC, 47 – 63 Hz, 0.6 – 0.3 A
depending on stage of expansion max. 60 W
|Compressed air supply||6 - 10 bar and 0.5 bar above test pressure (ISO 8573-1)|
|Pneumatic connection||Input (compressed air supply): 6 mm plug-in fitting
Port for test part: fitting for 6 x 1 mm polyamide tubes
Up to three pneumatically driven outputs [option]
|Dimension and Weights||Width: 345 mm, Height: 145 mm (3U), Depth: 435 mm,
|Standard delivery||Special packing, mains cable, documentation on CD, EC-Declaration of Conformity,
calibration certificate, D-Sub-plug including cable for inputs and outputs (PLC
communication) and DAkkS calibration certificate [DAkkS = Deutsche Akkreditierungsstelle]
|Optional accessories||Filter combination, standard leak, leak tight 3/2-way-valve, RS-232 / Ethernet adapter,
control- and evaluation software.
The CETATEST 815 is a fully automatic working leak tester for the detection of leaking parts within the cycle time of the production process. The pressure in the test part volume due to a leakage is compared with the pressure in a tight reference volume (differential pressure method)
Please complete the below form to receive further information.