If you want to find out more about

Pao Fong Vertical Milling Machine PF-2S

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

Pao Fong Vertical Milling Machine PF-2S is devised as a value line of manual milling machine which vertically oriented on the spindle axis with minimal friction. The Milling cutters are held in the spindle and rotate on its axis with the versatility of extended (or the table can be raised/lowered) which allows plunge cuts and drilling of various workpiece. The perfect combination of compact form factor within 1 tons of weight and spartan 3 HP electric motor is highly considered by many fabricator to work on various range of workpiece (other brands on the same class offer 2HP motors with similar spec). You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application.  Thanks to its monocoque frames which are made of high quality casted iron, the vibrations and noise can be absorbed and minimized your operators' fatigue. You can also do a angular cutting operation within 40o backward and 45o forward whilst from left to right within -90o to +90o. Pao Fong Vertical Milling Machine PF-2S provides two methods of cutting in the vertical (Z) direction: by raising or lowering the quill. This practical turret mill is delivered with a 228 x 1066 mm table which has a stationary spindle and can be easily fine tuned with its motorised spindle on both perpendicular and parallel to the spindle axis to accomplish precision cutting. This compact turret mill is also equipped with a quill which allows the milling cutter to be raised and lowered in a manner similar to a drill press. Your investment on Pao Fong Vertical Milling Machine PF-2S will improve your machining capabilities in terms of its faster machining set up in daily routines and durabilty of its motor on dispersing heat on higher load. Compared to other Bridgeport-styled machine, Pao Fong Vertical Milling Machine PF-2S also offer you a much better precision in terms of vibration reduction and its auto lubrication mechanism. The durable turret styled milling PF-2S machine is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.   Pao Fong Vertical Milling Machine PF-2S Features: Works as both medium class milling and heavy duty drill press 3 HP Spindle Motor 9"x 42"table standard Spindle Taper NST# 30, or R8, Spindle Taper NST# 40 optional. Special Square Head for Step Speed X,Y,Z-axes. Dovetail slide ways X.Y.-axes Coated with Teflon – B X.Y,Z.-axes Hardened & Ground   Optional Equipment: Coolant System Chip (pan ) Guard Work Lamp Electrical Cabinet Power feed - X,Y,Z .Axes Milling Vise , Clamping Kits Milling Chuck with Collets Digital Readout - X,Y,Z .Axes   Delivered With Standard Accessories: Draw Bar Tools & Tool Box Operation Manual One Shot Lubrication Front & Rear Plastic Splash Guard  

Pao Fong Vertical Milling Machine PF-2S is devised as a value line of manual milling machine which vertically oriented on the spindle axis with minimal friction. The Milling cutters are held in the spindle and rotate on its axis with the versatility of extended (or the table can be raised/lowered) which allows plunge cuts and drilling of various workpiece. The perfect combination of compact form factor within 1 tons of weight and spartan 3 HP electric motor is highly considered by many fabricator to work on various range of workpiece (other brands on the same class offer 2HP motors with similar spec). You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application. 

Thanks to its monocoque frames which are made of high quality casted iron, the vibrations and noise can be absorbed and minimized your operators' fatigue. You can also do a angular cutting operation within 40o backward and 45o forward whilst from left to right within -90o to +90o. Pao Fong Vertical Milling Machine PF-2S provides two methods of cutting in the vertical (Z) direction: by raising or lowering the quill. This practical turret mill is delivered with a 228 x 1066 mm table which has a stationary spindle and can be easily fine tuned with its motorised spindle on both perpendicular and parallel to the spindle axis to accomplish precision cutting. This compact turret mill is also equipped with a quill which allows the milling cutter to be raised and lowered in a manner similar to a drill press.

Your investment on Pao Fong Vertical Milling Machine PF-2S will improve your machining capabilities in terms of its faster machining set up in daily routines and durabilty of its motor on dispersing heat on higher load. Compared to other Bridgeport-styled machine, Pao Fong Vertical Milling Machine PF-2S also offer you a much better precision in terms of vibration reduction and its auto lubrication mechanism. The durable turret styled milling PF-2S machine is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.

 

Pao Fong Vertical Milling Machine PF-2S Features:

  • Works as both medium class milling and heavy duty drill press
  • 3 HP Spindle Motor
  • 9"x 42"table standard
  • Spindle Taper NST# 30, or R8,
  • Spindle Taper NST# 40 optional.
  • Special Square Head for Step Speed
  • X,Y,Z-axes. Dovetail slide ways
  • X.Y.-axes Coated with Teflon – B
  • X.Y,Z.-axes Hardened & Ground

 

Optional Equipment:

  • Coolant System
  • Chip (pan ) Guard
  • Work Lamp
  • Electrical Cabinet
  • Power feed - X,Y,Z .Axes
  • Milling Vise , Clamping Kits
  • Milling Chuck with Collets
  • Digital Readout - X,Y,Z .Axes

 

Delivered With Standard Accessories:

  • Draw Bar
  • Tools & Tool Box
  • Operation Manual
  • One Shot Lubrication
  • Front & Rear Plastic Splash Guard

 

TECHNICAL SPECIFICATION

Pao Fong Vertical Milling Machine PF-2S Ordering Guide:

 
Working Surface 228x1066 mm
Longitudinal Travel (X-axis) 676 mm
Cross Travel (Y-axis) 310 mm
Knee Travel (Z-axis) 406 mm
T-slot (3) 15,9 mm
Quill Travel 127 mm
Quill Diameter 85,725 mm
Spindle Taper R8 or N.S.T#30
Quill Feeds 0,04/0,08/0,15
Spindle Motor 3 HP
Step Spindle Speed

50Hz : 70~2720

16speed : 70~4530 rpm (OPT)

60Hz : 80~2720

16speed : 80~5440 rpm (OPT)

Overall Height A 2019 mm
Overall Depth  B 1620 mm
Overall Width  C 1488 mm
Ram Travel 450 mm
Overarm Swivel on Turret 360o
Head Tilf Front to Back 40o - 0o - 45o
Head Tilf Left to Right 90o - 0o - 90o
Approx. Net Weight 950 kgs
Packing Dimensions 148x140x186 cm

 

Pao Fong Vertical Milling Machine With Other Higher Models Ordering Guide:

 

Model

PF – 5S

PF – 5VS

PF–6S

PF – 6VS

Working Surface

254 x 1372 mm

254 x 1372 mm

Longitudinal Travel (X-axis)

930 mm

900 mm

Cross Travel (Y-axis)

420 mm

400 mm

Knee Tavel (Z-axis)

470 mm

460 mm

T – slot (3)

15.9 mm

Quill Travel

125 mm

Quill Diameter

105 mm

Spindle Tapper

N.S.T # 40

Qill Feeds

0.04/0.08/0.15 mm (0.0015” – 0.003” – 0.006)

Spindle Motor

5 HP

Step Spindle Speeds

50 Hz: 4P/8P-35 ~ 2850 r.p.m.

 2P/4P-70 ~ 4700 r.p.m. (O.P.T)

    60Hz: 4P/8P-45 ~ 3000 r.p.m.

 2P/4P-90 ~ 3600 r.p.m. (O.P.T)

Veriable Spindle Speeds

50 Hz: 4P/8P-55 ~ 2720 r.p.m.

 3900 r.p.m. (O.T.P)

60 Hz: 4P/8P-70 ~ 3400 r.p.m.

Overal Height                      H

2380 mm

2540 mm

Overal Depth                       L

2000 mm

1970 mm

Overal Width                       W

2180 mm

2180 mm

Ram Travel

584 mm

584 mm

Overarm Swivel On Turret

360o

Head Tilt Front – to  – back

40 o – 0 o – 45 o

Head Tilt Left – to – right

90 o – 0 o – 90 o

Approx. Net Weight

1588 / 1668 kgs

1637 / 1716 kgs

Packing Dimensions

171 x 155 x 200 cm

179 x 153 x 217 cm

 

Request a Quote

Request A Quote

Please complete the below form to receive further information.

Pao Fong Vertical Milling Machine PF-2S Pao Fong Vertical Milling Machine PF-2S Product description:

Pao Fong Vertical Milling Machine PF-2S is devised as a value line of manual milling machine which vertically oriented on the spindle axis with minimal friction. The Milling cutters are held in the spindle and rotate on its axis with the versatility of extended (or the table can be raised/lowered) which allows plunge cuts and drilling of various workpiece. The perfect combination of compact form factor within 1 tons of weight and spartan 3 HP electric motor is highly considered by many fabricator to work on various range of workpiece (other brands on the same class offer 2HP motors with similar spec). You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application. 

Thanks to its monocoque frames which are made of high quality casted iron, the vibrations and noise can be absorbed and minimized your operators' fatigue. You can also do a angular cutting operation within 40o backward and 45o forward whilst from left to right within -90o to +90o. Pao Fong Vertical Milling Machine PF-2S provides two methods of cutting in the vertical (Z) direction: by raising or lowering the quill. This practical turret mill is delivered with a 228 x 1066 mm table which has a stationary spindle and can be easily fine tuned with its motorised spindle on both perpendicular and parallel to the spindle axis to accomplish precision cutting. This compact turret mill is also equipped with a quill which allows the milling cutter to be raised and lowered in a manner similar to a drill press.

Your investment on Pao Fong Vertical Milling Machine PF-2S will improve your machining capabilities in terms of its faster machining set up in daily routines and durabilty of its motor on dispersing heat on higher load. Compared to other Bridgeport-styled machine, Pao Fong Vertical Milling Machine PF-2S also offer you a much better precision in terms of vibration reduction and its auto lubrication mechanism. The durable turret styled milling PF-2S machine is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.

 

Pao Fong Vertical Milling Machine PF-2S Features:

 

Optional Equipment:

 

Delivered With Standard Accessories:

  • Draw Bar
  • Tools & Tool Box
  • Operation Manual
  • One Shot Lubrication
  • Front & Rear Plastic Splash Guard

 

Pao isbn:1020-Pao
Milling 5 LFC PTE LTD Logo Milling New